Xbox Hacked Games to Upload Through Ftp

- Installation is reliable and easy if the instructions are followed closely. You lot must transfer the XBMC program to your XBOX harddrive and examination it to ensure it is functioning properly. If you wish for XBMC to beginning at boot that is also covered in this department.

Requirements

Modded XBox (NOT 360!)

XBMC requires a modded Xbox
Modded Xboxes come in two varieties:

Modchips - Modchips are small electronic circuits that are installed within the Xbox. This often involves physically opening the Xbox and soldering wires from the modchip to the motherboard. The modchip contains a "hacked" Xbox BIOS. Whatever "hacked" BIOS will work with XBMC but intendance must be taken with the utilize of large harddisks to ensure the right formatting to avoid data corruption.

Softmods - The Xbox tin can be "soft-modded" by exploiting a flaw in the Xbox software or the software of an Xbox game. The exploit and so loads a "hacked" BIOS into memory. Unlike modchips, softmods require no concrete modification to the Xbox.

Obtaining XBMC

Because XBMC requires the Microsoft XDK to compile, Squad XBMC cannot provide the executable for legal reasons. While packages might be institute on the Internet, these releases are not provided by Team XBMC and are not associated with Team XBMC in any manner.

Advanced users have the option of downloading the source lawmaking from SVN and compiling XBMC themselves. For more data run into

HOW-TO:Compile_XBMC_for_Xbox

Annotation: Squad-XBMC strongly recommend B4K3D PI builds of XBMC! (We are unable to back up whatsoever other SVN builds!)

A Method of Transferring Files to the XBox

Loading XBMC requires a method of getting files onto the Xbox hard drive.

FTP

By far the easiest method of transferring a file to the Xbox difficult drive is through FTP. This requires your Xbox to be networked to your computer. On the back left of the Xbox is an Ethernet port. In a typical network, 1 end of an Ethernet cable is plugged into this port while the other stop is plugged into an Net router. Another Ethernet cable runs between the router and your reckoner.

Many applications for the Xbox include FTP support. If your Xbox is modded, chances are you already have such an application. Xbox Applications that support FTP include Avalaunch, XBMP, Development-X and MediaXMenu.

For more than information see

HOW-TO: Connect to the network via router/ hub/ switch
HOW-TO:Use FTP to admission your Xbox over a network

Installing Via FTP as an Application

This is the best and easiest way to use XBMC; just FTP all the histrion files to the Xbox using any FTP server/client application for Xbox, for example, Avalaunch, XBMP, Evolution-Ten and MediaXMenu.

FTP the following files and folders (and their subfolders) to the xbox. A skillful place is either E:\Apps\XBMC or F:\Apps\XBMC.

default.xbe, \credits, \language, \media, \skin, \arrangement, \visualisations, \sounds, \screensavers, \web, \UserData.

The \python and \scripts folders are but required if yous intend to install and run python scripts, and often are not included past the people who distribute binaries (The XBMC team do not themselves distribute compiled binaries). The additional .txt files you see in the screenshot in a higher place are the changelog, bugfixes, and data regarding changing the Keymapping, Information for Skinners and the GPL - and every bit such are not required to run XBMC. They're just at that place for the users information.

For more than data on how to ready FTP on the Xbox, delight visit XBMC4Xbox Tutorials Forum.

Every bit a Dashboard

XBMC can exist run as the default dashboard of the Xbox. That means that it is the outset awarding that gets loaded when you turn on the Xbox. With an FTP Server, XBE launch office, and easy to use blueprint, not to mention its unparalleled ability as a media center, XBMC is a great choice equally a dash. There are at least 3 dissimilar means to install XBMC as a dashboard.

Option 1 - Using the Team XBMC Shortcut.xbe (Recommended)

Team XBMC recently developed their own Shortcut tool. It comes in 2 "flavors":

OpenXDK (source and pre-compiled binary available in SVN)
MS XDK (but source bachelor in SVN)

Download link to pre-compiled OpenXDK: Shortcut XBE.

As a precaution you lot should have a bootable rescue disc with a ftp enabled dashboard on information technology at hand if annihilation goes wrong (Run across beneath).

Both versions work in the same manner:

Find out the filename of your current dashboard (i.e C:\evoxdash.xbe for the Evox dashboard): That is the dashboard your Xbox is booting.
Rename your current dashboard to an alternating bootable proper noun. This will be used as a fallback if execution of the new shortcut fails. Consult the table below, or www.xbox-scene.com for details on your dash.
Download the XBMC Shortcut XBE from the link above and rename information technology to whatever the dash was named (usually evoxdash.xbe)
Upload the renamed Shortcut XBE (i.e. evoxdash.xbe) to where the old nuance was (Usually the root of the C: drive). The Shortcut XBE is now finer your dashboard(!)
Install XBMC every bit a regular application to somewhere on E: or F: (for example, E:\Apps\XBMC) (Instructions on how to install XBMC can be found under Installing XBMC as an Application)
Create a text file on your computer with the same proper noun as your renamed Shortcut XBE, except with the extension .cfg instead of .xbe (i.east. evoxdash.cfg) and put the path to the installed XBMC\default.xbe within it (eg. E:\Apps\XBMC\default.xbe)
Upload the text file you just created to the aforementioned identify you uploaded ShortcutXBE to in step iv. You should now have two files in your kick dash location. If your previous dashboard was Evox, These files volition be named evoxdash.xbe and evoxdash.cfg. The .xbe is the shortcut XBE you lot just uploaded, the .cfg is the text file containing a path to XBMCs default.xbe
Reboot

Congratulations, now you are all set and don't demand to alter the shortcut again, unless you change location of XBMC's default.xbe.

Please notation that step 2 is optional. The actual fallback lodge is BIOS dependant. If you don't know what BIOS you are running, you're at run a risk. First try the xbe given by the .cfg file. Otherwise, the post-obit filenames tin can be tried. But, the safest backup is to create a bootable rescue disc with a ftp enabled dashboard on information technology. See [1] for details.

C:\avalaunch.xbe
C:\unleashx.xbe
C:\xbmc.xbe
C:\evoxdash.xbe
C:\xboxdash.xbe
C:\default.xbe
C:\msdash.xbe

Choice 2 - Edit your Bios and re-flash to start XBMC's default.xbe from XBMC Folder

This manner is only recommended for experienced users. Irresolute your bios may cause your XBOX to non boot any more. Start of all, if you lot haven't already washed so employ the guide to Installing XBMC every bit an App to go XBMC onto your Xbox. I volition conduct on with the E:\Apps\XBMC example but it could be whatever folder on any partition you want (except D: plainly). Edit your bios with XBTool (or EVTool if using an EvoX M8 bios.) to kickoff XBMC's default.xbe instead of a xbe from C:\ on boot. Note you lot will not exist able to use this method if you intend to persist with an X2 4983.xy bios as neither XBTool nor EVTool back up information technology.

Circled in the picture is where y'all set your custom kicking path for your bios (The diagram is for XBTool merely EVTool is nigh identical in interface and execution). Open a "standard" (supported) bios in XBTool (or EVTool for M8), apply the up/down arrows past the drive letter to increase/decrease the drive alphabetic character by ane and enter the path on the drive in the text-box provided. e.g. In the example- change drive to E:\ and enter "Apps\XBMC\default.xbe" (bold yous are keeping the name of the .xbe file "default.xbe")

So save the bios with the edited boot-path (you can also edit the 2nd and 3rd boot sequences- they volition but load if there is no .xbe file at the first path)- this is now where information technology starts to crave some intelligence. Showtime of all you lot will need to know what size of bios your mod-scrap takes. e.g Some are 256k, some others take 512k- this is not a mod-chip manual you will need to find out this data for yourself or stick to Options 1 or 2. Suffice to say flashing your mod-chip with an incorrectly sized bios will render your modernistic-scrap unless you have a multiple bank scrap and/or an external programmer. Having a bootdisk in this situation will non help y'all!- the bios itself is corrupt so wouldn't fifty-fifty try to boot the kicking disk

Once the bios has been correctly sized and saved, cull the method of flashing your bios. Older modchips will demand to exist flashed from the Xbox- Apps like XFlash and the EvoX dash both accept the options to do this (you will need to ftp the edited bios over to their default bios directories). Newer modernistic-flake owners may be able to flash their bios externally via their pc using their Modchip Manufacturer'south software and either a parallel or USB cable to connect to their mod-flake.

Choice 3 - Using Team UIX XBE Shortcut Maker

Download here: Xbe Shortcut Maker v1.0

Clarification:

Creates shortcut xbes for Xbox titles keeping your electric current method of arrangement intact and so you lot can keep your hard bulldoze roots as uncluttered as possible, as well as add items to nuance menus without moving or creating duplicate installs. But betoken the target path to the xbe y'all wish to launch and the output xbe will be a 60kb shortcut that volition simply launch the given title.

Organization Requirements

Microsoft. Cyberspace Framework\

Usage

Start the program, Enter East:\Apps\XBMC\default.xbe (preferred) or the path where yous want to (or already accept!) uploaded XBMC'southward default.xbe. Information technology will now salvage a shortcut XBE, 60kB in size. Name this XBE according to the table below and so place this XBE on your XBOX'southward C partitioning. Don't forget to backup any files on C: if y'all plan to overwrite them!

Beneath, are the bios kicking sequences for the most widely used modded bioses that people use to run Xbox Backups and Domicile-brew Applications. Each bios will take i or more .xbe files that information technology volition await for when the Xbox gets switched on.

The numbers by the side of the different .xbe files are the lodge in which the bios will expect for the .xbe files. For example for x2 4974, on startup, the bios will expect to launch evoxdash.xbe first. If it is there then the .xbe labeled evoxdash.xbe will get loaded (usually only non necessarilyEvolution-X). If there is no evoxdash.xbe and then it will movement on to the 2nd .xbe in the sequence- in this case xboxdash.xbe (which is what the default Microsoft dashboard is named).

Xecuter2 4974–497v & Evox D6 & M7	one. evoxdash.xbe 2. xboxdash.xbe	Xecuter2 4976–4978	1. evoxdash.xbe ii. nexgen.xbe 3. xboxdash.xbe	Xecuter2 4979–4980.xy	1. evoxdash.xbe 2. avadash.xbe 3. mxmdash.xbe 4. xboxdash.xbe
Xecuter2 4981.xy-4983.xy	1. avalaunch.xbe 2. evoxdash.xbe 3. mxmdash.xbe 4. nexgen.xbe five. xboxdash.xbe	Evox M8	i. evoxdash.xbe 2. avadash.xbe 3. nexgen.xbe 4. xboxdash.xbe

So once you've found out which bios you have (your current dash should exist able to tell yous this information), use the chart to work out what y'all should rename XBMC'southward default.xbe, if in that location are more one .xbe on the BIOS'due south boot sequence other than xboxdash.xbe y'all don't accept to option the first ane so long equally in that location are no other xbe'due south on the C: bulldoze that come before the name you want to use.

First of all FTP into your Xbox with your old dashboard.

When you enter the C: drive, information technology should await similar to the picture on the right. I have highlighted in blue the files that are related to your current dashboard (in this caseEvolution X). All the files & folders that aren't highlighted are required past the Microsoft dashboard and therefore shouldn't be touched- unless you know what yous are doing.

Backup the non M$ Nuance files to your PC.

Now would be a proficient time to create a bootdisk with these files (if you already haven't washed so) which you can use if something goes wrong in the nuance installation of XBMC (not that it should). Put the files y'all've backed up to your PC in a binder (lets call the folder Kick). Rename the .xbe file "default.xbe". Now create an XDFS ISO of the "Kick" folder using something similar Qwix,Craxtion or SimpleXiso. Now burn down the created iso to a CD or DVD you know volition boot up. If demand exist at this indicate before going whatsoever further, exam the disc to make sure it boots on your Xbox. Brand sure it does boot- if things get wrong this is your only way of getting ftp admission to rectify any bug- so yous need to make sure the disc boots.

Y'all can see in this example that the only other .xbe other than xboxdash.xbe is labeled evoxdash.xbe, so information technology is prophylactic to assume that you lot can rename the Shortcut XBE default.xbe to evoxdash.xbe and ftp it to the C: bulldoze, and information technology should kicking.

Pick iv - Slutskank's Alternating FTP -Dash install -Piece of cake and Risky

Did the typical soft mod through Mechassault and installed the Unleashx dashboard. And so I ftp'd XBMC to two dissimilar locations. I launched one XBMC as an application and used the file director to open up the 'due east:\Dashboard\' directory and deleted everything. Then I copied the file contents from the 2d XBMC folder(the one that wasn't running, of form) to the dashboard folder and boom success. I believe it works because it appears that all typical xbox apps are named 'default.xbe' On the other hand, power outage or something and your screwed. Reboot the box and delete any extra copies of XBMC and you're done.

Upgrade XBMC for XBOX

Information technology is easy to upgrade/update to the latest version of XBMC for Xbox. It is recommended to do so often, as XBMC is changed on a daily footing.

Before you start, read the README that came with your build, or read the changelog to brand sure no special instructions be for your build (such as the requirement to remove the skin or database files completely etc.)

First make a backup of The UserData Folder. If yous are using profiles, also backup Q:\organisation\profiles.xml.

And then ftp the files mentioned in the final section to the folder that contains XBMC on your Xbox, overwriting existing files.

Those files are: default.xbe, \credits, \language, \media, \skin, \system, \visualisations, \sounds, \screensavers, \web. (Skip the UserData folder.)

Fixing Failed Installations

At times, major changes to the XBMC software will cause problems with upgrading. You may experience bug such every bit a complete failure to load, loss of sound/audio, or lack of controller role. Use the following procedures to remedy this problem:

Older Installations (Older than five June, 2006)

In older builds compiled prior to 5 June, 2006, just delete the post-obit folders:

E:\TDATA\0face008\
E:\UDATA\0face008\

Also, ensure that you are using a clean install of XBMC, one that uses no information or files from a previous build, such as the UserData binder and its contents.

Newer Installations (Builds Newer than 5 June, 2006)

In the event that XBMC fails to load properly after an upgrade, merely delete the \UserData folder from your XBOX and supercede information technology with the ane included with your build.
Note: Deleting the \UserData binder will remove all of your existing settings, thumbnails, IMDb information, keymapping, etc!

Uninstalling XBMC for Xbox

At that place is no uninstaller or script to uninstall XBMC from your Xbox, so y'all volition have to manually delete all files and folders.

Most files are located where 'you' put them, which means it'due south hard for us to respond, though nearly people put XBMC chief files under:

"E:\XBMC\"
"E:\APPS\XBMC"
"F:\XBMC\"
"F:\APPS\XBMC"

Older versions of XBMC might have a XboxMediaCenter.xml and a default.xbe file that was commonly renamed to EvoX.xbe in the root of C:\.
XBMC too has a save-game (that incorporate XBMC settings) which tin can be deleted using Microsoft's original Xbox™ Dashboard's Save-Game Manager. You tin also delete those save-game settings using FTP (but don't use XBMC's FTP-server to delete XBMC save-game files, if you practice so then all files can't exist deleted, instead connect to EvoX\EvolutionX or Avalaunch FTP-server), those folders and files are "E:\UDATA\0face008" and "E:\TDATA\0face008".

You might as well want to delete all the folder and files nether:

"E:\CACHE\"
"Y:\"
"X:\"
"Z:\"

ellsworthfichn1955.blogspot.com

Source: https://www.xbmc4xbox.org.uk/wiki/Installing_XBMC